As usual, fighting started way after the already relaxed beginning time of 1:00PM, though I don’t remember exactly when. I got through all my safeties with minimal problems; the only issue I had across all three robots was that Cannon was a smidgen overweight. I fixed that by enlarging its connector hole and liberally grinding the underside of its top with a Dremel tool. I also removed some screws. The 0.3oz literally fell off!
My first fight of the day was with Cannon, against Toni Fowlie’s antweight brick bot, Malicious Mule. I was relatively unsure of how Cannon would perform, but I was glad its first fight would be against a robot with no angled sides and no active weapon. I spun up and hit the Mule gingerly a few times. When I saw Cannon could survive its own weapon, I started hitting harder. What I found astounded me: I had truly built a cannon. I was able to send Malicious Mule flying all over the arena. Needless to say, I was stoked. I also won by knockout.
After the battle, I noticed two problems that I know I will need to fix in future Cannons:
- The UHMW sides are not strong enough to withstand Cannon’s hits. The ball bearings that support Cannon’s beater got pushed down. In the future, I will enlarge this hole, put something larger and stiffer in it as a bearing support (likely a small 7075 bushing), then mount the ball bearing inside of that.
- The battery and electronics like to flop around, and there is no front firewall–the only thing between LiPoly and titanium eggbeater at 13,000rpm was a few pieces of duct tape. I will need to fashion a firewall.
Mercifully, lolcat’s first fight was against a similarly unweaponed bot: my buddy Sean McKeown’s brick, Gyroscope. Gyroscope was put together at the last minute; it weighed in at a relatively anorexic 100g or so. Lolcat had no trouble throwing it skyward. It was another victory for my trusty beaters.
After I fought Sean’s fairyweight, my next opponent was Joey’s undercutter antweight, Swamp Woman 2. As I own a robot with exposed wheels, the prospects of fighting an undercutter scared me. I also had no idea how strong my weapon was–would it be able to hold up? I spun up at the beginning of the match and decided to keep the beater pointed at the other robot. The strategy worked: a big hit sent Swamp Woman reeling back and the next one was lucky–it removed a wheel. Cannon won by tap out.
After Swamp Woman, my next match was against Demise with lolcat. This fight, although it was my first loss of the tournament, started out very well. I delivered solid hits and managed to keep my beater pointed at Demise’s enormous, 50g spinning disc. Unfortunately, Demise eventually caught a wheel guard, breaking it and destroying the gearbox it was meant to protect. I was not able to hit Demise much more after that, and I lost by judges’ decision. What I learned in this fight:
- Lolcat wasn’t quite driving straight, and this was a big flaw. I need to make sure everything is either trimmed or aligned well enough that the ‘bot will drive in a line. This may require new side rails.
- ABS wheel guards are terrible. I will replace the terrible ABS wheel guards with good, 1/16″ UHMW ones.
- The beater assembly is surprisingly strong. It went blade-to-blade against Demise with very little trouble.
Before Cannon fought again, lolcat had to take on another challenger: Tenacious Tinkerbell, a smaller version Malicious Mule. The whole tiny rematch thing was extremely cute. Lolcat’s driving woes continued; I was not able to deliver as many hits as I should have been. Still, I stayed on the offensive the whole time and managed to win the judges over enough to get the victory.
Cannon’s next match was against the reigning antweight champion, Low Blow. This was easily my favorite match from Motorama. I hope the Cannon-Low Blow rivalry continues into the future. We wound up fighting three times during the course of the tournament (which you’ll read about later) and every match was wildly entertaining because it showcased each bot’s strengths so much. Low Blow is clearly built very well and is able to deliver big hits. Cannon is apparently built very well, too, despite the duct tape that holds in its juicy electronic guts. Cannon also tends to act like a bouncy ball around undercutters, and based on this fight, is able to send robots into the ceiling. Woo-hoo! After trading big hits, Cannon finally caused Low Blow’s blade to strike its own body, leading to a tap out.
With that fight taken care of, Cannon was guaranteed third place. The next fight was lolcat vs. Keres, a very nice-looking undercutter bot built by a person who gave me some invaluable advice about Coercion and Cannon’s weapons, Mike Jeffries. Mike recorded every single fight at Motorama, and I am featuring his videos in this event report. Click here to see the rest of the videos on his YouTube page.
Unfortunately for Mike (and fortunately for my cheezburger-loving, miniature eggbeater), Keres had taken a huge amount of damage from Demise, which wound up going undefeated and winning the tournament. Keres’ weapon wasn’t functioning, so all I had to do was hit, hit and hit again. I did the best I could with my shaky drive train. It was enough to get a nod from the judges. Lolcat finished 3-1 and took second.
In the third-place match, Cannon fought Algos. This was a tough one for me: Cannon’s drivetrain was far more decrepit than I thought it was after the match against Low Blow and as such, my robot was extremely slow. Adding insult to injury was Cannon’s seeming inability to bite on Algos. I did get lucky and manage to take out one of Algos’ drive wheels. The result was a nail-bitingly close judges’ decision after I did my best to stay aggressive (though I think I lost on that front) and was able to dish out more damage.
The next two fights were antweight finals matches against Low Blow. I’ll be upfront about it: I lost both. Reflecting back upon the experience, I wouldn’t say it was because I choked so much as that Low Blow was probably the better robot, even though I had already beaten it. It was also driven far more cautiously; I usually stay aggressive but my aggression did not pay off for me.
In the first match, I managed to keep things close, but the hits favored Low Blow and I eventually lost a wheel. In the second, Cannon was in rough shape and I wound up tapping out after my power connector got unplugged. It was a heartbreaking end to a good run, but with a few changes (read: what I outlined above and 1/16″ UHMW wheel guards), I’ll be ready to fight Low Blow. If I’m not super aggressive, maybe I’ll come away with the victory next time.
Saturday morning arrived, and my uncle and I decided to go out to eat. We visited the Colonial Park diner in Harrisburg, which turned out to offer delicious food (as with every year past, I ordered the #7 meal, which is eggs and hash–robot builders need protein!). We headed over to the Farm Show Complex way too early, as we had done the previous day; my uncle is a very early riser.
After far too much waiting, Coercion’s first fight was against a bot from Georgia Tech called Parallelogreg. Parallelogreg was a parallelogram-style wedge bot. From the looks of it, it was put together very well: titanium sides and very sturdy wedges. I was worried–I didn’t want my expensive spinner to not be able to break it. Luckily, when the fight started, Parallelogreg flipped against the arena wall after a failed box rush attempt.
Every fiber of my being wanted to free him. I remembered thinking about how the culture of combat robotics had changed from gentlemanly competitiveness–think French and Indian War–to something a little more competitive, and how I resented that change. At the same time, we don’t stand in a field and volley fire one round at a time anymore; one must stay with the times. Despite the crowd’s pleas (and those of my conscience), what stuck out in my mind was a conversation I had with my father shortly before I left for Motorama. He made me swear I wouldn’t free anyone off the wall.
Promise kept. Sorry, Greg.
Coercion’s next challenger was another Georgia Tech robot (which was a little awkward after the wall affair). It was called The Hammer, and featured a horizontal disc. It looked pretty nasty, it spun fast, and it spun in the opposite direction of my blade. That assured a massive hit. I was able to get to know The Hammer’s builder, Dan Hammer, a little, and learn a bit about life at Georgia Tech. He seemed to be fond of it.
When the fight started, Coercion got up to speed, but The Hammer didn’t. I drove straight into the Hammer’s front, which seemed to kill it, but then I came back for more: I removed both of its wheel guards, and after my miraculously lucky hits were over, my opponent was motionless. The Hammer got counted out. Coercion, which had won a total of three fights before Motorama 2013 (1-2 at Moto 2012 and 2-2 at Bot Blast 2012), was 2-0.
Unfortunately, it looked like Coercion’s luck had finally run out. I was set to fight Shame Spiral, runner-up at Motorama 2012 and infamous spinner killer. The entire outside of Shame Spiral is hardened steel, and I knew it would be a tough nut (haha… Team Slammers joke) for Coercion’s blade to crack. The fight began as I expected. Coercion’s blade got up to speed, and it took Shame Spiral’s hits well. Unfortunately, there wasn’t much in the way of damage until one big hit removed half of Shame Spiral’s wedge. A few hits later, I maimed the other half of the wedge. I had to turn off the blade for a little while to allow my weapon controller, weapon motor, and belt to cool off, but after the blade got back up to speed, Shame Spiral stopped moving. Coercion got the win by knockout.
That took care of Coercion’s Saturday fighting. All it had to do on Sunday was beat Dr. Super Brain to get a guaranteed third-place. I was amazed.
As I mentioned before, Coercion started off the day with a match against Dr. Super Brain. I actually fought Super Brain last year and lost the match; I was concerned about a repeat. I decided I would attack its back and hope for some maiming hits, though Super Brain’s titanium construction made me wonder I could break it.
The fight started and Dr. Super Brain…didn’t. A bad battery had failed, so Super Brain got counted out. Coercion won its second match of the event by being able to move at the start of the fight. Who says a good robot doesn’t need luck!? In my case, my luck helped me to 4-0 and the promise of third place.
With third place locked up, the competition started getting even fiercer. Coercion’s next fight was against Mondo Bizarro, a Weta kit that I was sure would provide an awesome match. It did, though the awesome match turned out to be Coercion’s first loss of the competition on a close judges’ decision. The reason for the loss? Coercion’s weapon stopped turning. It didn’t stop because the belt got clipped but because one of the pins attaching Coercion’s weapon motor to its speed controller got so hot that it unsoldered itself. Whoops. After doing a number on my pulley, the fight ended, for a little while, anyway.
Now in the losers’ bracket (technically my first trip there during the entire competition–Cannon’s first loss was in the finals and lolcat competed in a round robin), Coercion had to take on Grande Tambor. In another unbelievably lucky break, Grande Tambor was more Grande than Tambor: its drum wasn’t functioning. I was fighting a pushybot that had a big hunk of aluminum on its front. In another weapon controller-meltingly long battle (the reason for the shutdown in the middle), Coercion got enough hits to pick up a judges’ decision. It was on to the finals again!
When I opened up Coercion to charge its battery, a frightening surprise awaited me: the weapon controller had gotten so hot that the capacitors attached to it had melted off. I didn’t want to use one of the cheap, old, Chinese spares I had brought (the connectors were not the right size and I figured if the 40A E-Flite had died, the spares stood no chance), so Sean loaned me a 60A ESC. I didn’t realize it at the time, but it required a 3S battery. I had to jam in a 3S battery along with the bigger controller: it was a recipe for disaster. In fact, it caused disaster: on the first big hit of the match, Mondo Bizarro removed one of Coercion’s wheels and the weapon refused to spin up. After a little more prodding, the weapon motor started spewing smoke. Fearing for my LiPoly, Sean’s controller, and my robot, I tapped out after a very short match. I was disappointed again, but I had gone 5-2 with Coercion and picked up my third silver medal of the competition. Things could have been far worse.
Motorama 2013, my tenth trip to the Farm Show Complex, showcased how far I have come as a robot builder. My first robots were fashioned out of cardboard and hot glue; the ones that competed today were painstakingly CADded and CNC-machined. I bleed a little more when I build robots today than I used to, I sometimes get sweaty, but I do cry less (there’s no crying in robot fighting!). My three silver medals were the best result I have ever had at a robot competition. My robots’ combined record was 12-5, which is probably a new record for me for single wins at a competition and winning percentage. To be honest, I don’t mind not winning that much, although it would have been nice. What is really important was the journey: I learned a huge wealth of information about my robots’ strengths and flaws.
The best part about all this is that in robotic combat, there is really never anywhere to go but up. I have what seems like a tremendously good design in Cannon, lolcat remained reliable, and Coercion has finally become somewhat destructive. I was incredibly lucky this year at Motorama–lucky in the sense that I got some favorable draws and unorthodox wins as well as in the sense that I was able to compete at all. My uncle, Mike Filion, proved himself to be a valuable member of Team Slammers: I look forward to his help in future events.
This event report wouldn’t be complete without a heartfelt thank-you to my parents for supporting me through over ten years of very costly, highly emotional robotic endeavors. They introduced me to technology. They helped me find my passion in engineering and computers. They’re the reason why I do well in school. They’re the reason why I adore math and science. They’re the reason I’m the way I am, and I am ineffably grateful for how they’ve molded me. Without their amazing guidance and the lessons they have taught me, there would be no Cannon; there would be no lolcat; there would be no Coercion; there would be no Sharpened.
This concludes my 2659-word monstrosity of an event report. I probably won’t compete again until Bot Blast this summer, but I will post about my design changes as they’re made. I’ll also write more about programming again–I’m working on an independent study project in which I am creating an iPad app. Fun stuff!
Thank you for reading!